2001 Toyota Tundra Trailer Hitch Parts

Choose your Engine for your 2001 Toyota Tundra


Showing 1 - 5 of 5 products
Image
SKU
Product
Rating
Price

CURT
  • 2in. Front Receiver Hitch; Select Toyota Sequoia; Tundra
  • 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 9000lbs. Straight-Line Pull Drilling Required~Visibility: Exposed~Install Time 40 Minutes
  • CURT 31180 2-Inch Front Receiver Hitch; Select Toyota Sequoia; Tundra
  • 2 in Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 5000 Lbs.
    • WARNING CA Proposition 65: No
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Provides A Convenient Mount For Hitch Accessories
    • Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
    • Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made In USA
  • A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Toyota Sequoia and Tundra (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2001 - Toyota Tundra V 4663 Front 8 Cyl 4.7L 285

Draw-Tite
  • Class III Trailer Hitch
  • 2 in. Receiver; 500/5000 lbs. Weight Carrying [Tongue Weight/Gross Trailer Weight] 750/7500 lbs. When Used With A Weight Distribution Kit~ Install Time Is 15 Minutes
  • Max-Frame Receiver
  • Max-Frame Class III Trailer Hitch
  • Product Attributes:
    • Gross Trailer Weight: 5000 Lbs.
  • Features:
    • Max-Frame Class III Trailer Hitch
  • 2" Square Receiver Tube Opening . Max-Frame receivers are designed for trucks, vans and sport utility vehicles . Neat Appearance, All Frame Attachments . A-Coat Base with Black Powder Coat Finish . Rated up to 5,000 lbs. (GTW) Weight Carrying (WC). Rated up to 7,500 lbs. (GTW) Weight Distributing (WD) . Solid All-Welded Construction for Maximum Strength and Safety . Custom Built According to Manufacturer & Model Year . Ensures Perfect Fit and Top Towing Performance . Computer-Aided Design and Fatigue Stress Testing . Designed to Withstand Road Abuse Within Specified Capacities . Backed by a Nationwide Limited Lifetime Warranty

Additional Fitment Information:
Vehicle Position
2001 - Toyota Tundra Rear

Warn
  • 2 Inch Receiver; For Trans4mer System Only
  • 2 Inch Receiver; For Trans4mer System Only
  • Trans4mer ®
  • One of the simplest ways to mount your portable Winch is with the Warn 2 Inch front receiver. Installation is easy. The receiver mounts directly on most vehicle frames without drilling

Additional Fitment Information:
Vehicle
2001 - Toyota Tundra

CURT
  • Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Tundra
  • 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
  • CURT 13180 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota Tundra
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 6000 Lbs.
    • Visibility: Concealed
    • Weight Carrying Capacity: 6000
    • Body Shape: Square
    • WARNING CA Proposition 65: No
    • WD Tongue Weight: 1000
    • Drilling Required: No
    • Install Time: 30 Minutes
    • WC Tongue Weight: 600
    • Weight Distribution: 10000
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tundra (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2001 - Toyota Tundra V 4663 Rear 8 Cyl 4.7L 285

CURT
  • Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Tundra
  • 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 7500lbs. Weight Distributing; 750lbs. Weight Distributing Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
  • CURT 13184 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota Tundra
  • Class III 2 in. Receiver Hitch
  • Product Attributes:
    • Gross Trailer Weight: 5000 Lbs.
    • Visibility: Exposed
    • Weight Carrying Capacity: 5000
    • Body Shape: Square
    • WARNING CA Proposition 65: No
    • WD Tongue Weight: 750
    • Drilling Required: Yes
    • Install Time: 30 Minutes
    • WC Tongue Weight: 500
    • Weight Distribution: 7500
    • Receiver Tube Size: 2.000 In.
  • Features:
    • Made w/A Vehicle-Specific Design For A Custom Fit
    • Tested For Safety In Accordance w/SAE J684
    • Precisely Welded For Superior Strength And Fit
    • Protected By A Durable High-Gloss Black Powder Coat Finish
    • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
    • Strengthened w/A Cast Welded Seamless Collar
    • Equipped w/An Open-Back Receiver For Easy Cleaning
    • Backed By A Limited Lifetime Warranty
    • Made in USA [may include imported hardware]
  • Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tundra (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 7,500 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2001 - Toyota Tundra V 4663 Rear 8 Cyl 4.7L 285
Showing 1 - 5 of 5 products

Loading...